Arduino MiniCore Triggering Debugging Error Warning While Uploading Burning Bootloader ATmega48
generated error warning (ATmega48 Bare Minimum System): 1========== avrdude: error: program enable: target doesn't answer. 1 avrdude: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check the selected serial port does not exist or your board is not connected 2 & 3===========-- avrdude: Expected signature for ATmega48P is 1E 92 0A Double check chip, or use -F to override this check. Wrong microcontroller found. Did you select the right board from the Tools > Board menu? 4===========---------- wiring not properly connected avrdude: set SCK frequency to 16000 Hz avrdude: set SCK frequency to 16000 Hz avrdude: verification error, first mismatch at byte 0x0000 0xf0 != 0x46 avrdude: verification error; content mismatch avrdude: verification error; content mismatch ===end of strory===
